OpenWRT Atmel SAMA5D3 and MAX10 FPGA board
Product description
Overview
DAB-OWT-SAM5 Smart Router was designed by DAB-Embedded BVBA for collecting and processing data from different wired and wireless interfaces. This router has ability to interconnect a lot of general and specific wireless interfaces like WiFi, ZigBee, Z-Wave and more, with wired interfaces like Ethernet, USB, CAN 2.0A/B, RS232, KNX and more. All data from such interfaces can be processed or stored in microSD card or in NAND Flash. Heart of the DAB-OWT-SAM5 Smart Router is Atmel SAMA5D36 processor with 536MHz ARM Cortex-A5 core (with Floating-Point Unit). Well known processor gives an unlimited opportunity to customize free OpenWRT Linux firmware for achieving any client request.
Highlights
• Dual LAN
• WiFi IEEE® 802.11 b/g/n
• USB Host, Device
• Altera MAX10 FPGA
• Li+ battery powered device
• Ultra low power consumption
Key features
- CPU: Atmel SAMA5D36 (ARM Cortex-A5, 536MHz, FPU)
- FPGA: Altera MAX 10 FPGA with integrated ADC
- Memory: Up to 512MB DDR2, Up to 2GB NAND Flash
- External storage: MicroSD card slot
- 2x 100Mbit/s LAN ports
- USB 2.0 HS Host
- USB 2.0 HS Device
- WiFi IEEE® 802.11 b/g/n (Wi-Fi Direct, station mode and Soft-AP support)
- Power supply: (External +5V AC/DC power supply, External Li+ battery)
- Expansion connector for:
- Wired interfaces: RS232, CAN 2.0 A/B, KNX, RS-485/422 and more
- Wireless: ZigBee, Z-Wave, KNX RF, and more
- External I/O (SAMA5D36):
- LCD (24-bit)
- UART/USART
- SPI
- ADC/Analog touch
- SSP/Audio
- ISI/Camera
- Timers/PWM
- CAN 2.0 A/B
- USB Host
- External I/O (FPGA MAX10):
- LVDS I/O (diff pair)
- FPGA I/O
- ADC inputs
- External Li+ battery (+3.7V) support
- External +5V DC power supply
- Board dimensions: 90x90 mm
- Linux Kernel 4.1 and BSP
- OpenWRT firmware
- NIOS II example (MAX 10)
- Windows Embedded Compact 7